Alltrade10 Pc. Bearing And Race Installer Kit - 948004

Worked well for replacing the rear bearings on a 2007 GMC Sierra. The correct size was there for proper installation of the bearings. The quality seems good for many years of use. I am overall happy with my purchase. Saved me a lot of money in doing tje job myself.

Good tool for value

I bought this to replace my bearings and seals on my trailer. I have been installing bearings and seals for more than fifty years and decided it was time to upgrade to a driver. I used this to replace the seals on my F150 front axles and it worked perfect. I don't know why I waited so long to buy one of these. It makes installing grease seals' breeze. I know that there were complaints about the angle of the bearing drivers but I don't see that will matter that much when driving in races.

The quality of this set is very good, but it doesn't have a size to fit Subaru oil seals for the front CV axles. So if this is what you need it for it won't work. I deducted a star for that.

I used this driver set to install bearings and seals in the differential of a 2001 Chevy 7.625” ring gear. The drivers didn’t fit perfectly, I realize there are thousands of different size bearings. I gave it 5 stars for what it is, an inexpensive bearing and seal driver. I used the old race and the backside of a disc to drive two races in that it didn’t fit. It’s going to fit some bearings and not others.i don’t know if it would hold up to shop use, but it is probably good enough for occasional use.I am glad I bought it.

This is a very nice,and complete set,that makes installing bearing races a breeze.

The most important thing is how you remove the bearing. You must pay attention. If you have successfully removed the bearing take your time and feel around where the bearing will be installed. If you do not feel any burrs continue installing the new bearing. If you do feel any burrs gently file them down with a rat tail file. Then install the new races and bearing with this tool. And by the way yes it is not made in America and most important it is made from aluminum which means you don't pound on it with your hammer you use a dead blow hammer or rubber mallet. The most important thing is to know you have important people that are riding in that vehicle you or maybe family members. Get it right the first time. You don't want to go through this again. This set will last you a long time if you follow what I've told you. It's made from aluminum so you don't damage your bearings. Good luck with your project. I hope this is helped you.

Still holding up well. Not used every month, but working fine when needed. Would buy again.

Works good. Nice choice of sizes.

Muy buena calidad, excelente relación costo beneficio. No son para utilizarse en prensa como calzas. Se tiene que usar a mano. El material parece muy blando para ser sometido a mucha presión, Los he ocupado para instalar retenes y pistas de baleros.

Kit parfait.

Buen producto me encanto te quita mucho trabajo

Calidad muy regular, no sirve para tazas de baleros medianos y grandes. Para retenes sirve bien.